Electrolux FAC124P1A Instruções de Operação descarregar pdf (Página 94)

Section 4 Component Teardown

4-34

Condenser Removal

To remove the condenser:

1. Disconnect power supply from unit.

2. Remove the front panel and cabinet wrapper/sleeve.

3. Extract the three screws from each side of the

condenser securing the left and right side condenser

bracket to the condenser. (See Figure 4-81)

4. Attach an approved self tapping line tap valve to the

process tube. Connect refrigerant recovery system

to tap valve. Turn on recovery system, open the

line tap valve, and allow refrigerant to flow into an

approved tank.

5. Disconnect inlet and outlet lines from condenser.

6. Extract the two screws securing the bottom of the

condenser to the unit base. (See Figure 4-87)

7. Carefully lift the condenser out from the unit base.

Evaporator Removal

To remove the evaporator:

1. Disconnect power supply from unit.

2. Remove the front panel and cabinet wrapper/sleeve.

3. Remove the control box assembly with power cord

and thermistors.

4. Remove the front scroll housing adapter from above

the evaporator. Extract the two screws on each side

of the evaporator securing the mounting bracket to

the unit partition. (See Figure 4-88)

5. Attach an approved self tapping line tap valve to the

process tube. Connect refrigerant recovery system

to tap valve. Turn on recovery system, open the

line tap valve, and allow refrigerant to flow into an

approved tank.

6. Disconnect inlet and outlet lines from evaporator.

7. Carefully lift the evaporator out from the unit base.

Figure 4-87.

Screws

Figure 4-88.

Evaporator

Mounting Screws

Blower Housing

Scroll

Front

Scroll

Housing

Adapter

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 139 140

Comentários a estes Manuais

Sem comentários

Electrolux FAC124P1A Instruções de Operação Página 94

Comentários a estes Manuais

Manuais e produtos relacionados com Aparelhos de ar condicionado "split system" Electrolux FAC124P1A