Electrolux FAC124P1A Instruções de Operação descarregar pdf (Página 81)

Section 4 Component Teardown

4-21

Condenser Removal

To remove the condenser:

1. Disconnect power supply from unit.

2. Remove the front panel and cabinet wrapper/sleeve.

3. Remove the condenser cover.

4. Attach an approved self tapping line tap valve to the

process tube. Connect refrigerant recovery system

to tap valve. Turn on recovery system, open the

line tap valve, and allow refrigerant to flow into an

approved tank.

5. Disconnect inlet and outlet lines from condenser.

6. Extract the two screws securing the bottom of the

condenser to the unit base. (See Figure 4-51)

7. Carefully lift the condenser out from the unit base.

Evaporator Removal

To remove the evaporator:

1. Disconnect power supply from unit.

2. Remove the front panel and cabinet wrapper/sleeve.

3. Remove the front scroll and heater assembly.

4. Attach an approved self tapping line tap valve to the

process tube. Connect refrigerant recovery system

to tap valve. Turn on recovery system, open the

line tap valve, and allow refrigerant to flow into an

approved tank. (See Figure 4-52 and 4-53)

5. Disconnect inlet and outlet lines from evaporator.

6. Carefully lift the evaporator out from the unit base.

Compressor Removal

To remove the fan motor:

1. Disconnect power supply from unit.

2. Remove the front panel assembly. Pull the unit from

the cabinet wrapper/sleeve.

3. Attach an approved self tapping line tap valve to the

process tube. Connect refrigerant recovery system

to tap valve. Turn on recovery system, open the

line tap valve, and allow refrigerant to flow into an

approved tank. (See Figure 4-53)

4. Disconnect the compressor inlet line above the

accumulator. Disconnect discharge line one inch

from the outlet.

5. Use a 13mm socket or wrench and remove the 3

nuts securing the compressor to the unit base.

6. Remove the compressor electrical components by

using an 8mm socket or wrench and remove the nut

securing the cover to the top of the compressor.

Screws

Figure 4-51.

Figure 4-52.

Figure 4-53.

13mm

Nuts

Process

Tube

Process

Tube

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 139 140

Comentários a estes Manuais

Sem comentários

Electrolux FAC124P1A Instruções de Operação Página 81

Comentários a estes Manuais

Manuais e produtos relacionados com Aparelhos de ar condicionado "split system" Electrolux FAC124P1A