Electrolux FAC124P1A Instruções de Operação Página 83

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 82
Section 4 Component Teardown
4-23
Control Box Component Removal
The control box houses the control board, capacitor
and terminal block. The power cord enters the control
box along the left side and is held in position with a
grommet.
1. Disconnect the power supply from unit.
2. Remove front panel and cabinet wrapper/sleeve.
3. Discharge capacitor.
To remove the capacitor:
4. Extract the screw securing the retaining band to
bottom of control box. (See Figure 4-59)
5. Disconnect all wire leads from capacitor. Label as
needed for proper reconnection.
To remove power cord:
6. Disconnect white wire from terminal block.
7. Disconnect black wire from control board.
8. Extract ground screw securing green wire to bottom
of control box. (See Figure 4-59)
To remove terminal block:
9. Disconnect all wire leads from terminal block. Label
as needed for proper reconnection.
10. Extract screw securing terminal block to bottom of
control box. (See Figure 4-59)
To remove thermistors:
11. Remove any wire retainers securing the thermistor
wire leads. Disconnect thermistor leads at control
board and remove from unit.
To remove the control board:
12. Disconnect all wire leads from control board. Label
as needed for proper reconnection.
13. Compress the plastic retainers securing the control
board to the front of the control box and remove
from unit.
Figure 4-59.
NOTE: Wires omitted for clarity.
Capacitor
Screw
Figure 4-60.
Screw
Terminal Block
Ground
Screw
Control Box Screws
Control Board
To discharge the high voltage capacitor, wait for 60
seconds and then short-circuit the connection of the
high-voltage capacitor (that is the connecting lead of
the high-voltage rectifier) against the chassis with the
use of an insulated screwdriver.
CAUTION
Control Box Screws
Control
Box
Screws
Figure 4-58.
Circuit
Board
Screws
Vista de página 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 139 140

Comentários a estes Manuais

Sem comentários