
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time, press
again and again until the indicator
for the Time of Day function flash-
es. You must not set the Duration
or End function at the same
time.
4.3 Pre-heating
1.
Set function and maximum tem-
perature.
2.
Let the appliance operate without the
food for approximately 1 hour.
3.
Set function and maximum tem-
perature.
4.
Let the appliance operate without the
food for approximately 10 minutes.
5.
Set function and maximum tem-
perature.
6.
Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is
the usual effect. Make sure the airflow is
sufficient.
Preheat the two ovens. Heat up one oven
at a time.
5. HOB - DAILY USE
WARNING!
Refer to the Safety chapters.
5.1 Heat settings
Con-
trol
knob
Function
Double zone switch
0 Off position
1-9 Heat settings
(1 = lowest heat setting; 9 =
highest heat setting)
1.
Turn the control knob to a necessary
heat setting.
2.
To complete the cooking process,
turn the control knob to the “0” posi-
tion.
Use the residual heat to decrease
energy consumption. Switch off
the cooking zone for approximate-
ly 5-10 minutes before the cook-
ing process is completed.
5.2 Use of the double zone
WARNING!
To set double zone on turn the
control knob with the double zone
to the right (do not turn it thought
the stop position).
1.
Turn the control knob to the right - to
position "9".
2.
Turn the control knob slowly to sym-
bol
until you can hear a click.
At this time the two cooking zones
are on.
3.
To set necessary heat setting refer to
"Heat settings".
5.3 Residual heat indicator
The residual heat indicator comes on
when a cooking zone is hot.
ENGLISH 9
Comentários a estes Manuais