
30
INSTRUCTIONS FOR THE USER
INSTALLATION
It is important that all operations are carried out by
qualified personnel, in the normal manner.
The specific instructions are describred in the chapter
on installation.
Before using the unit, take off the special protective
layer which protects the stainless steel and anodyne
tin parts.
USE
Control knobs on the cooker
The knobs for using the gas cooker are found on the
control panel.
The regulation knobs hould be turned in anti-clockwise
direction until the small flame symbol, and vice-versa
for the larger symbol.
No gas supply
Maximum gas supply
Minimum gas supply
Some models are equipped with a safety-valve. In case
of extinction of the flame, this device will operate,
stopping gas supply (ex.: overflowing, draughts).
IGNITION OF HOB BURNERS
To ignite a burner, before positioning the saucepan,
use the appropriate switch marked by a small spark,
push the corresponding knob in completely and turn in
an anticlockwise direction to the maximum position;
upon ignition regulate the flame as required.
In models provided with a safety device, the control
knob must be pressed in for approximately 5 seconds
until the safety valve automatically keeps the flame lit.
If after a few attempts the burner does not ignite, check
that the baffle and its cap are correctly positioned.
To interrupt the supply of gas, turn the knob in a
clockwise direction to the position " ".
During cooking, when using fats or oils, take
particular care as they can, when over-heated, self-
ignite.
When using the big-rapid burner, place the special
grid on the pan support, as shown in fig.2.
Burner min diam max diam
Big-Rapid (large) ø 220 mm ø 260 mm
S/Rapid (medium) ø 120 mm ø 220 mm
Auxiliary (small) ø 80 mm ø 160 mm
Fish kettle burner 120 x 270 210 x 380
Table of minimum and maximum diameters of
recipients to be placed on burners.
Table 1
Fig. 1
Fig. 2
Comentários a estes Manuais