Electrolux PXL64DV Manual do Utilizador

PBL64PNL64PTL64PXL64ENHob User Manual

• To clean the enamelled parts, capand crown, wash them with warmsoapy water and dry them carefullybefore you put them back.6.4 Cleaning the spark plu

7.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.

they do not come in touch with mobileparts or they are not squeezed. Also becareful when the hob is put together withan oven.Make sure that the gassup

WARNING!Make sure the flame doesnot go out when you quicklyturn the knob from themaximum position to theminimum position.8.5 Electrical connection• Ma

8.9 Possibilities for insertionThe panel installed below the hob mustbe easy to remove and let an easyaccess in case a technical assistanceinterventio

9.4 Gas burners for NATURAL GAS G20 20 mbarBURNER NORMAL POWERkWMINIMUM POWERkWINJECTOR MARK1/100 mmRapid 3,0 0,75 119Semi-rapid 2,0 0,45 96Auxiliary

• If it is possible, always put the lids on the cookware.• When the liquid starts to boil, turn down the flame to barely simmer the liquid.• If it is

ENGLISH 17

www.electrolux.com18

ENGLISH 19

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867315468-A-522014

injuries and damages. Always keep the instructions withthe appliance for future reference.1.1 Children and vulnerable people safety• This appliance ca

• Remove any spillage from the lid before opening. Letthe hob surface cool down before closing the lid.• If the supply cord is damaged, it must be rep

electricity mains cable or plug (ifapplicable) can make the terminalbecome too hot.• Use the correct electricity mainscable.• Do not let the electrici

temperature than oil used for the firsttime.• Do not put flammable products oritems that are wet with flammableproducts in, near or on the appliance.W

3. PRODUCT DESCRIPTION3.1 Cooking surface layout21 341Rapid burner2Semi-rapid burner3Auxiliary burner4Control knobs3.2 Control knobSymbol Descriptionn

lets the thermocouple warm up. Ifnot, the gas supply is interrupted.3. Adjust the flame after it is regular.If after some tries the burnerdoes not lig

CAUTION!Make sure that the pots areplaced centrally on theburner in order to getmaximum stability and to getlower gas consumption.5.2 Diameters of coo