Electrolux EKK6450AOX Manual do Utilizador descarregar pdf (Página 31)

A B C

DE

A) Gas connection point (only one point

is applicable for the appliance)

B) Gasket

C) Adjustable connection

D) Natural Gas pipe holder

E) LPG pipe holder

13.11 Hob injectors replacement

Replace the injectors when you change

the gas type.

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. Remove the injectors with a socket

spanner 7.

4. Replace injectors with the ones

necessary for the type of gas you use.

5. To change to gas G110, G120 or

G2.350, attach the air regulator onto

the main jets. Screw it on as tight as

possible.

6. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply.

You can find this plate in

the bag supplied with the

appliance.

If the supply gas pressure is not constant

or it is different from the necessary

pressure, install an applicable pressure

adjuster on the gas supply pipe.

13.12 Adjustment of minimum

level at the hob burner

To adjust the minimum level of the

burners:

1. Light the burner.

2. Turn the knob on the minimum

position.

3. Remove the knob.

4. With a thin screwdriver, adjust the by-

pass screw position (A). The bypass

screw position (A) depends on model.

A

• If you change from natural gas to

liquid gas, fully tighten the

adjustment screw.

• If you change from liquid gas to

natural gas, undo the by-pass

screw approximately 1/4 of a turn .

ENGLISH

31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comentários a estes Manuais

Sem comentários