Electrolux EGT6343LOK Manual do Utilizador descarregar pdf (Página 10)

6.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when you

replace the pan supports

to prevent the hob top

from damage.

2. The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burners to operate correctly

make sure that the arms of the pan

supports are aligned with the centre of

the burner.

6.3 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and some detergent. After

cleaning, rub the hob dry with a soft

cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before

you put them back.

6.4 Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

6.5 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the conditions

of the gas supply pipe and the pressure

adjuster, if fitted.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

There is no spark when you

try to activate the spark

generator.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is released. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comentários a estes Manuais

Sem comentários