Electrolux EGC3322NOK Manual do Utilizador

EGC3322EN Hob User Manual

• Scratches or dark stains on thesurface have no effect on how the hoboperates.• Use a special cleaner applicable forthe surface of the hob.WARNING!Do

Problem Possible cause Remedy The fuse is blown. Make sure that the fuse isthe cause of the malfunc‐tion. If the fuse is blownagain and again, contac

C. Stick it on instruction booklet.8. INSTALLATIONWARNING!Refer to Safety chapters.8.1 Before the installationBefore you install the hob, write down t

ABA. End of shaft with nutB. ElbowConnection to the gas supply should bewith either rigid or semi-rigid pipe, i.e.steel or copper.The connection shoul

WARNING!Make sure the flame doesnot go out when you quicklyturn the knob from themaximum position to theminimum position.8.6 Electrical connection• Do

A B1. Connect the green and yellow (earth)wire to the terminal which is markedwith the letter 'E', or the earth symbol, or coloured green an

6.7.BA8.8.9 Installation of more thanone hobIf several hobs are to be installed side byside into the same cut out, an assemblykit including a support

9.2 Bypass diametersBURNER Ø BYPASS 1/100 mmRapid 52Auxiliary 289.3 Other technical dataTOTAL POWER:Gas original: G20 (2H) 20 mbar = 2,9 kWGas replace

Energy efficiency for the gas hob(EE gas hob) 59.4%EN 30-2-1: Domestic cooking appliances burning gas - Part 2-1 : Rational use ofenergy - General10.

ENGLISH 19

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867329044-A-522015

result of incorrect installation or usage. Always keep theinstructions in a safe and accessible location for futurereference.1.1 Children and vulnerab

• CAUTION: The cooking process has to be supervised.A short term cooking process has to be supervisedcontinuously.• WARNING: Danger of fire: Do not st

appliance. The use of inappropriate guards can causeaccidents.2. SAFETY INSTRUCTIONSThis appliance is suitable for thefollowing markets: GB IE2.1 Ins

access to the mains plug after theinstallation.• If the mains socket is loose, do notconnect the mains plug.• Do not pull the mains cable todisconnect

• Make sure cookware is centrallypositioned on the burners.• Make sure the flame does not go outwhen you quickly turn the knob fromthe maximum to the

3.2 Control knobSymbol Descriptionno gas supply / off posi‐tionSymbol Descriptionignition position / maxi‐mum gas supplyminimum gas supply4. DAILY USE

The spark generator canstart automatically when youswitch on the mains, afterinstallation or a power cut. Itis normal.4.3 Turning the burner offTo put