Electrolux WRG980CGS Manual do Utilizador Página 5

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 7
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 4
8 9
ACCESSORIESHALOGEN LAMPS
CHANGING THE HALOGEN LAMPS
Using a small flat blade screwdriver remove the inner
stainless steel ring to obtain access to the halogen
globe. When removing the inner ring, do so carefully,
as the glass lens could easily fall out of the inner ring.
Remove halogen globe, whilst cool, and replace
carefully with a new globe.
The rangehood takes 2 x 20W, 12 volt halogen globes.
When handling globes hold with a cloth or gloves to
ensure perspiration does not come in contact with the
globe as this can reduce the life of the globe.
OPTIONAL DUCTING ACCESSORIES
Part Numbers Description
WRG970CS* WRG980CGS
AR150RC AR150RC 150mm G/Bond Roof Cowl
AR150F AR150F 150mm G/Bond Flue 1200mm
AR150WV AR150WV 150mm Wall Vent + Flexi Duct
AR600RK*
AR600RKG
RecirculatingKit
AR600CF*
AR600CFG
Replacement carbon mat filter
AR600FS*
AR600FSG
Stainless steel exhaust cover extension 1200mm
NOTE: Accessories are to be purchased separately.
WRG980CGS
WRG970CS*
MAINTENANCE AND CLEANING
• Beforemaintenanceorcleaningiscarriedout,
the canopy rangehood should be disconnected from
the main power supply. Ensure that the rangehood is
switched off at the wall socket and the plug removed.
• Externalsurfacesaresusceptibletoscratches
and abrasions, so please follow the cleaning
instructions to ensure the best possible result is
achieved without damage.
STAINLESS STEEL SURFACE
Clean stainless steel surfaces using non-abrasive
cleaning products that are specifically for use on
stainless steel.
To ensure best results also use an even pressure and
follow the grain of the stainless steel. Use of a soft cloth
reduces the risk of scratching. If the cloth is wet ensure
that a dry soft cloth is used to wipe down the surface
again reducing the risk of any surface rust appearing.
CLEANING GREASE FILTERS
The mesh filters can be cleaned either by hand or in
the dishwasher. After cleaning ensure that the filters are
completely dry before refitting.
By hand: Soak in warm water with some washing liquid.
For stubborn grease stains use a soft nylon brush to help
remove these stains.
In a dishwasher: Ensure that placement of the filters
is made so as to not impede the function of the spray
arm. Washing the filters in a dishwasher may cause
discolouration of the aluminium inner mesh over time
although it will not affect their performance. Filters should
be washed separately to crockery and kitchen utensils.
GLASS FASCIA
The glass fascia on model WRG980CGS can be
cleaned with window cleaner or a mild detergent and
hot water and paper towelling.
WMAN_CAN_RH_Jun11.indd 8-9 24/06/11 2:48 PM
Vista de página 4
1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários