Electrolux WE170P Manual do Utilizador descarregar pdf (Página 5)

• Connect the mains plug to the mains socket only at the

end of the installation. Make sure that there is access to

the mains plug after the installation.

• Do not touch the mains cable or the mains plug with

wet hands.

• Do not pull the mains cable to disconnect the appliance.

Always pull the mains plug.

• Only for UK and Ireland: The appliance has a 13 A

mains plug. If it is necessary to change the fuse in the

mains plug, use a 13 A ASTA (BS 1362) fuse.

• This appliance complies with the E.E.C. Directives.

1.4 Water connection

• Do not cause damage to the water hoses.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

• Before connection to new pipes, pipes not used for a

long time, where repair work has been carried out or

new devices fitted (water meters, etc.), let the water flow

until it is clean and clear.

• The operating water pressure (minimum and maximum)

must be between 0,5 bar (0,05 MPa) and 8 bar (0,8

MPa).

• Ensure that there are no visible water leaks during and

after the first use of the appliance.

1.5 Use

• Do not change the specification of this appliance.

• Obey the safety instructions on the detergent

packaging.

• Obey the maximum load volume of 8 kg (refer to the

“Programme chart” chapter).

• Do not put flammable products or items that are wet

with flammable products in, near or on the appliance.

• Make sure that you remove all metal objects from the

laundry.

ENGLISH

1 2 3 4 5 6 7 8 9 10 ... 31 32

Sem comentários

Electrolux WE170P Manual do Utilizador Página 5