
If you set something
incorrect, the display shows
the message .
9.8 Starting a programme
Press the button .
• The indicator of the button
stops flashing and stays on.
• The indicator of the running phase
starts flashing on the display.
• The programme starts and the
door locks.
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance can adjust
the programme duration
automatically depending
with the laundry load.
• The display shows the
new time to end.
9.9 Starting a programme with
the delay start
1. Press Delay start repeatedly until the
display shows the delay you want to
set.
The related indicator comes on the display
.
2. Press :
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press . To
cancel the delay start:
• Press to set the
appliance to pause.
• Press Delay start until
the display shows '.
• Press
again to
start the programme
immediately.
9.10 Cancelling the delay start
To cancel the delay start:
1. Press button to set the appliance
to pause.
The related indicator flashes.
2. Press button Delay start repeatedly
until the display shows .
3. Press button again to start the
programme immediately.
9.11 Interrupting a programme
and changing the options
You can change only some options before
they operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
If the appliance is connected
to a coin operated machine,
you can interrupt a
programme only 5 minutes
after the programme start.
After this time the child lock
automatically activates.
9.12 Cancelling a running
programme
1. Press the button for some seconds
to cancel the programme and to
deactivate the appliance.
ENGLISH
19
Comentários a estes Manuais