Electrolux GHL246SW Manual de Instalação descarregar pdf (Página 6)

commercial buildings and in the

industry

• Cantonal instances regulations - VKF

fire safety directive "Thermal devices

2015“

1. Slide the oven into its place and align

it with the furniture.

WARNING!

Do not manipulate the

threaded gas connections.

The screws securing the gas

installation and the

installation itself must not be

touched.

min. 50

100

480

160

A 759 +0/-1

N 762

105

2. Fix the oven with 2 screws at every

side.

A

3. Open the door to access the gas

installation.

4. Connect the oven to the gas supply.

1.10 Chimney over the steam

outlet

In case of stone worktops, the supports

have to be glued in the cut-out by means

of a special glue for stone.

The chimney (2) is installed over the hot

air outlet and fixed with 1 screw (3).

Adjust the height of the chimney so that

the two flaps rest on the worktop and fix

it with the screw (3)

1

2

3

1.11 Installing burners

1. Remove the screws (1) and (3) from

the transport safeguards on the left

and right side (2) and remove the

transport safeguards.

2. Loosen the four screws (4) next to

the four burners.

1

2

4

3

3

1

2

3

3

CAUTION!

The screws to secure

the horizontal support

are necessary when the

hob is installed with a

wooden surround frame.

3. If necessary, loosen the eight screws

(5) on the two cross bars and lift the

cross bars up. Tighten the screws

again firmly.

www.electrolux.com6

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários