Electrolux EQW4111BOG Manual do Utilizador descarregar pdf (Página 61)

formity with the standard and regulations

force.

• The power cable must be placed in such

a way that it does not touch any hot

part.

• Connect the appliance to the mains with

a device that lets to disconnect the ap-

pliance from the mains at all poles with a

contact opening width of minimum 3

mm, eg. automatic line protecting cut-

out, earth leakage trips or fuse.

• None of a parts of the connection cable

can not get a temperature 90°C.

REPLACEMENT OF THE

CONNECTION CABLE

In order to replace the connection cable

speak your local Service Force Centre!

To replace the connection cable use only

H05BB-F Tmax 90°C (or higher) type.

Make sure that the cable section is applica-

ble to the power and the working tempera-

ture. The yellow/green earth wire must be

approximately 2 cm longer than all phase

wires.

ASSEMBLY

min.

50mm

min.

450mm

min.

650mm

=

=

340

+1

mm

600mm

490

+1

mm

R 5mm

min.

30 mm

min. 20 mm

• Seal the gap between the worktop and

glass ceramic with silicone.

• Put some soapy water on the silicone.

ENGLISH 61

1 2 ... 56 57 58 59 60 61 62 63 64

Comentários a estes Manuais

Sem comentários