
10.3 Using the Function Lock
You can activate the function only when
the appliance operates.
The Function Lock prevents an
accidental change of the oven function.
1. To activate the function activate the
appliance.
2. Activate an oven function or setting.
3. Touch and hold
and at the
same time for 2 seconds.
An acoustic signal sounds.
Loc comes on in the display.
To deactivate the Function Lock repeat
step 3.
If the Pyrolysis function
operates, the door is locked.
A message comes on in the
display when you touch a
sensor field.
You can deactivate the
appliance when the Function
Lock is on. When you
deactivate the appliance, the
Function Lock deactivates.
10.4 Using the settings menu
The settings menu lets you activate or
deactivate functions in the main menu.
The display shows SET and the number
of the setting.
Description Value to set
1 RESIDUAL HEAT INDICATOR ON / OFF
2 CLEANING REMINDER ON / OFF
3
KEY TONE
1)
CLICK / BEEP / OFF
4 FAULTY TONE ON / OFF
5 DEMO MODE Activation code: 2468
6 SERVICE MENU -
7 RESTORE SETTINGS YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is activated,
touch then touch it again and hold
for three seconds.
The display shows SET1 and "1" flashes.
2. Touch or to set the setting.
3. Touch .
4. Touch
or to change the value
of the setting.
5. Touch .
To exit the Settings menu, touch or
touch and hold .
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if an oven function operates and you do
not change any settings.
Temperature (°C) Switch-off time
(h)
30 - 115 12.5
120 - 195 8.5
200 - 245 5.5
www.electrolux.com16
Comentários a estes Manuais