10
1.
Open the lid of the appliance. Unscrew the the lid
ballast container. (fig. 11)
2.
Unscrew the cap of the lid ice accu and fil it with clean
water.
3.
Unscrew the 3 frame screws and remove the plastic
Refrigerator innerliner. (fig. 12)
4.
Remove all 36 ice-packs from the ice bank and the 5
ice-packs in the refrigeration compartment.
5.
Plug in the appliance for test. The green lamp
indicates that the unit is under power. (fig. 13)
6.
Check in the compressor compartment that the
compressor starts and the fan on the left side is running.
7.
Check that the blower in the bottom of the dividing wall
is running. Check by pushing with your fingers to the
flap thermostat, if a free moving to open and close the
cold air channel is granted.
3. PREPARATIONS
Fig. 11.
Fig. 12.
Fig. 13.
Comentários a estes Manuais