Electrolux EBGL40XWE Manual do Utilizador descarregar pdf (Página 17)

To clean metal surfaces, use a dedicated

cleaning agent.

Clean the oven interior after each use. Fat

accumulation or other food remains may

result in a fire. The risk is higher for the grill

pan.

Clean all accessories after each use and

let them dry. Use a soft cloth with warm

water and a cleaning agent. Do not clean

the accessories in the dishwasher.

Clean stubborn dirt with a special oven

cleaner. Do not apply oven cleaner on the

catalytic surfaces.

If you have nonstick accessories, do not

clean them using aggressive agents,

sharp-edged objects or a dishwasher. It

can cause damage to the nonstick

coating.

Clean the moisture from the cavity after

each use.

11.2 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

CAUTION!

Be careful when you remove

the shelf supports.

1. Pull the front of the shelf support away

from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove it.

2

1

Install the removed accessories in the

opposite sequence.

11.3 Catalysis (Refresh

programme)

CAUTION!

Do not clean the catalytic

surface with oven sprays,

abrasive cleaning agents,

soap or other cleaning

agents. This will damage the

catalytic surface.

Wipe off the bottom of the cavity with a

soft cloth. Remove heavy dirt with normal

cleaning agents or oven spray

commercially available. Make sure to avoid

any contact of the cleaning agent with the

catalytic coated walls and top.

Clean the oven door inner glass with warm

water and a soft cloth.

Remove all accessories and removable

shelf supports.

The walls and the top of the cavity are

catalytic-coated. They absorb fat and food

particles at high temperature without

smell.

To support this self-cleaning process heat

the appliance without any food regularly.

Spots or discolouration of the

catalytic surface have no

effect on catalytic properties.

1. Touch again and again until the

display shows "Cata" and the duration

of the cleaning procedure (1 hour).

You cannot set the Duration, but you

can use the End function to delay the

start of the cleaning procedure.

An acoustic signal sounds after the time

ends. The appliance deactivates.

2. Touch any sensor field to stop the

signal.

3. Clean the bottom of the appliance

with a soft and moist sponge.

To protect the bottom from spoiling, insert

a cake tray while baking below the food.

Do not line the oven with aluminium foil

and do not place baking trays, pots, etc.

on the oven floor, as the heat that builds

up will damage the oven enamel.

ENGLISH

17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comentários a estes Manuais

Sem comentários