Electrolux GK58TSIO Manual do Utilizador descarregar pdf (Página 8)

OPTIHEAT CONTROL (3 STEP

RESIDUAL HEAT INDICATOR)

Warning! \ \ The risk of

burns from residual heat!

OptiHeat Control shows the level of the re-

sidual heat. The induction cooking zones

make the heat necessary for cooking di-

rectly in the bottom of the cookware. The

glass ceramic is hot from the heat of the

cookware.

OPERATING INSTRUCTIONS

ACTIVATION AND DEACTIVATION

Touch

for 1 second to activate or deac-

tivate the appliance.

AUTOMATIC SWITCH OFF

The function stops the hob

automatically if:

• All cooking zones are deactivated.

• You do not set the heat setting after you

activate the appliance.

• You spill something or put something on

the control panel for more than 10 sec-

onds, (a pan, a cloth, etc.). The sound

operates some time and the appliance

deactivates. Remove the object or clean

the control panel.

• The appliance become too hot (e.g.

when, a saucepan boils dry). Before you

use the hob again, the cooking zone

must be cool.

• You use not correct cookware. The sym-

bol

comes on and the cooking zone

deactivates automatically after 2 minutes.

• You do not deactivate a cooking zone or

change the heat setting. After some time,

comes on and the appliance deacti-

vates. See the table.

The times of Automatic Switch Off

Heat setting

- - - -

The cooking

zone deacti-

vates after

6 hours 5 hours 4 hours 1.5 hours

THE HEAT SETTING

Touch the control bar at the heat setting.

Change to the left or the right, if it is neces-

sary. Do not release before you have a cor-

rect heat setting. The display shows the

heat setting.

P

AUTOMATIC HEAT UP

1

2

3

4

5

6

7

8

9

10

11

12

0

1234567891011121314

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see the

8 electrolux

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários