Electrolux EKG613A1OX Manual do Utilizador descarregar pdf (Página 19)

4

4

5

5

6

12.5 Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

13. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

13.1 What to do if...

Problem Possible cause Remedy

There is no spark when you

try to activate the spark

generator.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the con-

nection diagram.

There is no spark when you

try to activate the spark

generator.

The fuse is released. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

There is no spark when you

try to activate the spark

generator.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes im-

mediately after ignition.

Thermocouple is not heated

up sufficiently.

After lightning the flame,

keep the spark generator

activated for equal or less

than 10 seconds

The flame ring is uneven. Burner crown is blocked

with food residues.

Make sure that the injector

is not blocked and the

burner crown is clean.

ENGLISH

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentários a estes Manuais

Sem comentários