Electrolux EKD60950W Manual do Utilizador Página 3

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 28
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 2
Do not use the cooking zones with empty
cookware or without cookware
Do not let cookware boil dry. This can
cause damage to the cookware and hob
surface.
If an object or cookware falls on the hob
surface, the surface can be damaged.
Do not put hot cookware near to the con-
trol panel because the heat can cause a
damage to the appliance.
Be careful when you remove or install the
accessories to prevent damage to the ap-
pliance enamel.
Cookware made of cast iron, cast alumi-
nium or with damaged bottoms can
scratch the hob surface if you move them
on the surface.
Discoloration of the enamel has no effect
on the performance of the appliance.
To prevent damage or discoloration to
the enamel:
do not put any objects directly on the
appliance floor and do not cover it with
aluminium foil;
do not put hot water directly into the ap-
pliance;
do not keep moist dishes and food in
the appliance after you finish the cook-
ing.
Do not apply pressure on the open door.
Do not put flammable materials in the
compartment below the oven. Keep
there only heat-resistant accessories (if
applicable).
Do not cover oven steam outlets. They
are at the rear side of the top surface (if
applicable).
If you have an implanted pacemaker, you
must keep your upper body a minimum
of 30 cm away from the induction cook-
ing zones while they operate.
Do not use the appliance during a power
cut.
Do not put hot cookware near to the con-
trol panel because the heat can cause a
damage.
Care and cleaning
Before maintenance, make sure that the
appliance is cold. There is a risk of burns.
There is a risk that the glass panels can
break.
Keep the appliance clean at all times. A
build-up of fats or other foodstuff can re-
sult in a fire.
Regular cleaning prevents the surface ma-
terial from deteriorating.
For your personal safety and the safety of
your property, only clean the appliance
with water and soap. Do not use flamma-
ble products or products that can cause
corrosion.
Do not clean the appliance with steam
cleaners, high-pressure cleaners, sharp
objects, abrasive cleaning agents, abra-
sive sponges and stain removers.
If you use an oven spray, follow the in-
structions from the manufacturer. Do not
spray anything on the heating elements
and the thermostat sensor.
Do not clean the glass door with abrasive
cleaning agents or metal scraper. Heat re-
sistant surface of the inner glass can
break and shatter.
When the door glass panels are dam-
aged they become weak and can break.
You must replace them. Contact the serv-
ice centre.
Be careful when you remove the door
from the appliance. The door is heavy.
Before maintenance, deactivate the appli-
ance and disconnect it from the power
supply.
Be careful when you change the oven
lamp. There is a risk of electrical shock.
Cool down the appliance. There is a risk
of burns.
Do not clean catalytic enamel.
Installation
Only an approved technician can install
and connect the appliance. Contact an
approved service centre. This is to pre-
vent the risks of structural damage or
physical injury.
Make sure that the appliance is not dam-
aged because of transport. Do not con-
nect a damaged appliance. If necessary,
contact the supplier.
Remove all packaging, stickers and lay-
ers from the appliance before first use.
Do not remove the rating plate. It can in-
validate the guarantee.
Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
electrolux 3
Vista de página 2
1 2 3 4 5 6 7 8 ... 27 28

Comentários a estes Manuais

Sem comentários