Electrolux EHK13WE Manual do Utilizador descarregar pdf (Página 19)

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

9.2 Oven ceiling

You can fold down the heating element

on the oven ceiling to clean the oven ceil-

ing easily.

WARNING!

Deactivate the appliance before

you fold down the heating ele-

ment. Make sure that the appli-

ance is cold. There is a risk of

burns.

Folding down the heating element

1.

Remove the shelf supports.

2.

Hold the heating element with two

hands at the front.

3.

Pull it forwards against the spring

pressure and out along the supports

on the two sides.

4.

The heating element folds down.

You can clean the oven ceiling.

Installing the heating element

1.

Install the heating element in the op-

posite sequence.

Install the heating element cor-

rectly above the supports on the

inner walls of the appliance.

2.

Install the shelf supports.

9.3 Removing / inserting the

door

To clean the door remove it.

A

A

CAUTION!

Be careful when you remove the

door from the appliance. The door

is heavy. There is a risk of injury or

damage to the appliance.

Removing the door

1.

Open the door as far as it goes.

2.

Press down the clamping levers (A)

on the two door hinges.

45°

3.

Close the door until it is at an angle

of approximately 45°.

4.

Hold the door with one hand on each

side and pull it away from the appli-

ance at an upwards angle.

Put the door with the outer side

down on a soft and level surface

to prevent scratches.

Inserting the door

To insert the door do the above steps in

the opposite sequence.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários