Electrolux EGG6042NOW Manual do Utilizador

EGG6042EN Hob User Manual

clean to prevent difficult lighting andcheck that the burner crown holes arenot obstructed.6.5 Periodic maintenanceSpeak to your local Authorised Serv

7.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.

However, if the room has a door whichopens directly to the outside no air ventis required even if the volume is between5 m³ and 11 m³.If there are oth

8.4 Injectors replacement1. Remove the pan supports.2. Remove the caps and crowns of theburner.3. With a socket spanner 7 remove theinjectors and repl

Before carrying out the connection, makesure:1. The limiter valve and the electricalsystem can take the appliance load(see the rating plate)2. The sup

8.8 Building Inmin. 55 mmmin. 650 mm550 mmmin. 100 mm30 mm470 mmmin. 600 mmABA) supplied sealB) supplied bracketsCAUTION!Install the appliance only on

9.3 Other technical dataTOTAL POWER:Gas original: G20 (2H) 20 mbar = 8 kWGas replacement: G30 (3+) 28-30 mbar = 567 g/hG31 (3+) 37 mbar = 557 g/hElect

Energy efficiency per gas burner(EE gas burner)Left rear - Semi-rapid 59.2%Right rear - Semi-rapid 59.2%Right front - Auxiliary not applicableLeft fro

www.electrolux.com18

ENGLISH 19

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867305788-B-252015

injuries and damages. Always keep the instructions withthe appliance for future reference.1.1 Children and vulnerable people safety• This appliance ca

• If the supply cord is damaged, it must be replaced bythe manufacturer, an authorized Service or similarlyqualified persons in order to avoid a hazar

• Do not let the electricity mains cabletangle.• Make sure that a shock protection isinstalled.• Use the strain relief clamp on thecable.• Make sure t

WARNING!Risk of damage to theappliance.• Do not keep hot cookware on thecontrol panel.• Do not let cookware to boil dry.• Be careful not to let object

3. PRODUCT DESCRIPTION3.1 Cooking surface layout21 341Rapid burner2Semi-rapid burner3Auxiliary burner4Control knobs3.2 Control knobSymbol Descriptionn

lets the thermocouple warm up. Ifnot, the gas supply is interrupted.3. Adjust the flame after it is regular.If after some tries the burnerdoes not lig

CAUTION!Make sure that the pots areplaced centrally on theburner in order to getmaximum stability and to getlower gas consumption.5.2 Diameters of coo