Electrolux EBSL60SP Manual do Utilizador descarregar pdf (Página 19)

3.

Press again and again until the

display shows Duration .

4.

Set the time.

5.

Press again and again until the

display shows SET + GO .

6.

Press OK to confirm.

To start SET + GO function, press any

sensor field (except for

). The set heat-

ing function starts.

When the heating function ends, an

acoustic signal sounds.

• When the heating function operates,

the Function Lock function is on.

• You can activate and deactivate the

SET + GO function in the Basic Set-

tings menu.

10.5 Automatic switch-off

For safety reasons the appliance deacti-

vates after some time:

• If a heating function operates.

• If you do not change the oven tempera-

ture.

Oven temperature Switch-off time

30 °C - 115 °C 12.5 h

120 °C - 195 °C 8.5 h

200 °C - 245 °C 5.5 h

250 °C - maximum °C 3.0 h

The automatic switch-off works

with all functions, except Light ,

Duration , End Time and Core

Temperature Sensor.

10.6 Cooling fan

When the appliance operates, the cooling

fan activates automatically to keep the

surfaces of the appliance cool. If you de-

activate the appliance, the cooling fan can

continue to operate until the appliance

cools down.

11. CARE AND CLEANING

WARNING!

Refer to the Safety chapters.

Notes on cleaning:

• Clean the front of the appliance with a

soft cloth with warm water and a clean-

ing agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the oven interior after each use.

Then you can remove dirt more easily

and it does not burn on.

• Clean all oven accessories after each

use and let them dry.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a dish-

washer. It can cause a damage to the

nonstick coating.

11.1 Catalytic cleaning

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects

on walls while the appliance operates.

1.

Remove all parts from the appliance.

The catalytic cleaning

procedure cannot start:

– If you do not remove the shelf

support or telescopic shelf run-

ners (if present).

– If you do not fully close the

door.

2.

Activate the Catalysis function in the

main menu.

3.

Press OK to confirm.

The display shows the time of day

and duration of the cleaning process

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentários a estes Manuais

Sem comentários