
Rear spacers
Install the spacers provided within the ac-
cessory bag as shown in the figure.
Install the spacers on the back side of the
panel.
Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
Door reversibility
To change the opening direction of the
door, do these steps:
1. Remove the plug from the power.
2. Remove the ventilation grille. Remove
the upper filling and install it on the op-
posite side of the grille.
Remove the pedal hole cover and install
the cover provided in the accessory bag
on the opposite side.
3. Lay down the appliance back side down
on a wooden support.
4. Unscrew the hinge (B1) and remove the
cover plate (B2) and the support (B3).
Remove the cover (B4) on the opposite
side and install the support (B3) the cov-
er plate (B2) and the hinge (B1). Install
the cover (B4) on the opposite side.
5.
Unscrew the lower hinge (C1). Move the
pin to the opposite side (C2).
Unscrew and move the pedal to the op-
posite side (C3).
Screw on the lower hinge on the oppo-
site side.
6. Tighten the pin with the adjustment
spanner supplied.
12
electrolux
Comentários a estes Manuais