Electrolux ER6422T Manual do Utilizador descarregar pdf (Página 9)

Building the appliance in under a

worktop

This appliance can also be built in under the worktop

of your kitchen unite. To do this, proceeds as follows:

1. remove screws which secure the top to the rear

brackets and front hinges;

2. move the top slightly to release it from the

retainers and remove it

3. unscrew the screws securing the rear feet to the

cabine";

4. remove the 3 mm shim from the feet and refit

them; screw in the front feet to obtain the required

height.

Note

Hole provided in the top hinges enable the appliance

to be secured to the kitchen worktop by means of two

screws.

Important

For the appliance to function properly, an

opening of at least 137 cm

must be cut in the

kitchen worktop (see fig.).

A minimum clearance must also be provided

between the,condenser and the wall, as

shown in the figure.

1 2 3 4 5 6 7 8 9

Sem comentários

Electrolux ER6422T Manual do Utilizador Página 9