Electrolux DC3600EWL Manual do Utilizador descarregar pdf (Página 7)

Door alignment is dependent

on proper levelling.

4.2 Fixation to wall

CAUTION!

The drying cabinet must

be fixed to the wall.

The drying cabinet needs to be in its

permanent installation site when you are

drilling and securing it to the wall.

Use suitable fasteners and supplied

washers to secure the drying cabinet.

4.3 Vent hose connection

The appliance should be connected to an

existing ventilation system.

The appliance can be connected in two

ways:

1. Connected with air terminal fitting.

2. Connected to a separate exhaust air

valve.

WARNING!

The air inlet ( E ) on the top

of the drying cabinet must

not under any circumstances

be covered.

1. Connected with air terminal fitting.

- Install the spigot (A) in the hole by

turning clockwise.

A

1

2

- Connect the exhaust hose (C) to the

spigot (A) and the air terminal fitting (B),

then attached to the exhaust valve in the

room. Secure the cable straps (D).

A

D

C

B

E

D

2. Connected to a separate exhaust

valve.

- Install the spigot (A) in the hole by

turning clockwise.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentários a estes Manuais

Sem comentários