Electrolux CARAVAN RM 4360 Instruções de Operação Página 3

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 7
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 2
off"
OPERATING INS
TR
UCTIONS
CONTROLS
The refrigerator can
be
run
on either 230 V,
12
V or
LP
gas.
Changing between these modes of operation is carried out
by
means of the controls of the control panel shown
in
fig
3.
Two rocker switches are used to select the electric power
supply, one for 230 V
(B)
and one for
12
V (A).
Refrigerator temperature
is
controlled
by
a thermostat
(C)
when the unit runs
on
230 V. The gas supply
is
turned
on/off
by
means of the knob (0). When lighting the gas, one
must press
in
the knob as explained further on.
Refrigerator temperature
is
controlled
by
a thermostat
(E)
when the refrigerator runs on LP gas. Please note that the
thermostat has
no
position.
In
model
RM
4271 , the gas flame
is
electronically lit, moni-
tored and relit
if
necessary. For this the toggle switch
(F)
should on" during gas operation.
An
indicator lamp
in
the switch flashes when the automatic
igniter attempts
to
light the burner. Otherwise this lamp
is
off.
In
model
RM
4270 a manual piezo-eletric igniter
is
used.
When the button
(G)
is pressed, sparks are generated at
the burner.
Inside the refrigerator at bottom left is a sight glass for the
burner. A blue light can
be
seen through
it
when the flame
is
alight. (RM 4270)
STARTING THE
RE
FRIGERATOR
Caution!
Only use one source of energy at a time
The position numbers refer
to
fig .
3.
LP Gas operation
After initial installation, servicing, or changing gas cylinders
etc., the gas pipes may contain some air which should
be
allowed to escape
by
briefly turning
on
the refrigerator or
other appliances. This will ensure that the flame lights
immediately.
To start gas operation:
1.
Open the shut-off valve of the gas bottle (check that there
is
enough gas). Open anyon-board shut-off valve.
2.
Check that the switches for mains and
12
V operation are
off.
If you have Model
RM 4271 proceed as follows:
3.
Turn
on
the gas supply by pressing the
(0)
knob and
turning
it
to
the position
4.
Set the thermostat knob
(E)
to
the highest setting.
5.
Depress switch (F). A light
in
the switch should now start
to
flash, indicating that sparks are being generated at the
burner.
6.
Press the
(0)
button. This opens the flame failure device
and allows gas
to
flow to the burner.
7.
When the flame lights, the sparking stops automatically
and
the switch stops flashing.
8.
Keep the (0) button pressed for a further
10
to
15
secon-
ds
to
active the
fl
a
me
failure device, then release
it.
If you have Model
RM
4270 proceed as follows:
3.
Turn
on
the gas supply by pressing the
(0)
knob and
turning
it
to
the position
4.
Set the thermostat knob
(E)
to
the highest setting.
5.
Keeping the flame failure device buttom
(0)
pressed,
operate the igniter
(G)
until the flame lights.
6.
Keep the
(0)
buttom pressed for a further
10
to
15
se-
conds then release
it.
The flame can
be
observed
in
a wiewing glass inside the
refrigerator at the bottom left
(RM4270).
To terminate gas operation, turn knob (0)
to
and (when
applicable) set switch
(F)
to
230 V Operation
e Turn off gas or
12
V operation when applicable.
e Turn the knob
(C)
of the thermostat
to
its highest (col-
dest) position.
e Set switch
(B)
to
position
I.
The switch will light
up
green
when the power supply
is
connected.
12 V Operation
Only operate your refrigerator on
12
V when the engine of
the vehicle
is
running - otherwise your battery will soon
be
discharged.
e
If
applicable, turn off the gas operation.
e Set the
12
V rocker switch
(A)
to
I.
The switch will light
up
red
when the power supply
is
connected.
WINTER OPERATION
Please check
th
at
the ventilation grilles or the flue outlet are
not blocked by snow, leaves etc.
ELECTROLUX ventilation grilles A 1620 (fig 2), can
be
fitted with winter covers, model WA 120,
to
protect the
cooling unit against cold air. The covers may
be
fitted when
the outside temperature
is
below approx. and should
be
fitted when the temperature
is
below the freezing point.
We suggest that you fit the winter covers also
in
the case
that the vehicle
is
laid
up
during the winter months.
REGULATING THE TEMPERATURE
The position number refers
to
fig .
3.
It will take a few hours for the refrigerator
to
reach normal
operating temperature. So
we
suggest you start
it
well
in
advance of a trip and
if
possible store
it
with precooled
foodstuffs.
On
230 V operation the refrigerator
is
controlled by a ther-
mostat and the thermostat knob (C) should
be
set at 3-5. If
a lower (colder) temperature
is
desired, set the thermostat
to
a higher figure.
On
12
V operation the refrigerator works continuously.
On LP gas operation the refrigerator temperature is regula-
ted
by
the gas thermostat (E), which should
be
set
at
3-5 If
a lower (colder) temperature
is
desired, set the thermostat
to
a higher figure.
8
Vista de página 2
1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários