Electrolux C41022G-M Manual do Utilizador descarregar pdf (Página 13)

electrolux Use 7

Examples of use

The outdoor area in which the barbecue is positioned must

meet the following requirements:

1. there may be walls on all sides, but there must be at least

one permanent doorway and no ceiling;

2. there may be no more than two side walls when there is a

ceiling;

3. there may be partial overhead cover, including a ceiling,

but with no more than two walls and with the following

conditions:

a) At least 25% of the total wall surface is completely open.

b) At least 30% of the remaining surface is open and not

delimited.

If positioning on a balcony or terrace, at least 20% of the total

wall surface must be open.

Assembling the frame for the ceramic tiles

1. Remove the cast iron grids D (see “Positioning the internal

components” at page 7).

2. Put the sides frame A and the inner frame B inside the

burners box over the burners.

3. Put the rails C into the slits on frames A and B.

4. Locate the ceramic tiles inside the frame as shown in the

picture.

5. Place the cast iron grids D.

To assure a good working, take care that the ceramic tiles holes get not

obstructed. Overturn the tiles regularly to let the burners carbonate the

cooking residuals.

Positioning the internal components

Before beginning to cook, check the burners, flame

spreaders, grills and griddle are correctly in place.

• The figure shows the correct sequence for positioning the

burners A, flame spreaders B, grills C, the grids D and the

ceramic tiles frame F.

• The tabs on the flame spreaders B should be inserted into

the slots E on the inside of the barbecue.

Only in the conditions illustrated above, with all the aforesaid

components correctly assembled, is it advisable to start

cooking. Any other set-up may constitute a risk for the user

and may jeopardise the good use of the appliance.

12 3

3a 3b

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Electrolux C41022G-M Manual do Utilizador Página 13