Electrolux EBGL4XSP Manual do Utilizador Página 11

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 10
2. Press or to set a heating
function.
3. Press or the oven starts
automatically after 5 seconds.
If you turn on the oven and do not set any
heating function or programme, the oven
turns off automatically after 20 seconds.
6.3 Changing the temperature
Press
or to change the
temperature in steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
6.4 Checking the temperature
You can check the current temperature in
the oven when the function or programme
works.
1. Press .
The display shows the temperature in the
oven.
2. Press or the display shows again
the set temperature automatically after
5 seconds.
6.5 Fast heat up
The Fast heat up is available only for some
oven functions. If Faulty tone is turned on
in the settings menu, the signal sounds if
the Fast heat up is not available for the set
function. Refer to "Additional functions"
chapter, Using the settings menu.
The Fast heat up decreases the heat up
time.
To turn on the Fast heat up press and
hold
for more than 3 seconds.
If the Fast heat up is turned on the display
shows: flashing horizontal bars and
.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change
the time of day only when the oven is on.
DURATION To set how long the oven works.
END To set when the oven turns off.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set a countdown time. This function has no effect
on the operation of the oven. You can set the MINUTE
MINDER at any time and also when the oven is off.
00:00
COUNT UP TIMER To set the count up, which shows how long the oven
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DURA-
TION and END are set.
ENGLISH
11
Vista de página 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentários a estes Manuais

Sem comentários