
OPTIHEAT CONTROL (3 STEP
RESIDUAL HEAT INDICATOR)
Warning! / / The risk of
burns from residual heat!
OptiHeat Control shows the level of the re-
sidual heat.
OPERATING INSTRUCTIONS
ACTIVATION AND DEACTIVATION
Touch
for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
•
All cooking zones are deactivated (
).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). The sound
operates some time and the appliance
deactivates. Remove the object or clean
the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
comes on and the appliance deacti-
vates. See the table.
The times of Automatic Switch Off
The heat setting
, - - - -
The cooking
zone deacti-
vates after
6 hours 5 hours 4 hours 1.5 hours
THE HEAT SETTING
Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a cor-
rect heat setting. The display shows the
heat setting.
ACTIVATION AND DEACTIVATION OF
THE OUTER RING
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field
. The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
AUTOMATIC HEAT UP
1
2
3
4
5
6
7
8
9
10
11
12
0
1234567891011121314
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
illustration), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1.
Touch
( comes on in the display).
electrolux 7
Comentários a estes Manuais