
The stainless steel can become dirty if the
temperature is too high. Because of this
do not cook with the stone pots, earthen-
ware pans or cast iron plates. Do not use
the aluminium foil to prevent damage to
the top during operation.
The Stainless steel parts wash with water,
and then dry with a soft cloth.
Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
To remove the dirt:
1.
– Remove immediately: melted
plastic, plastic foil, and food with
sugar. If not, the dirt can cause
damage to the appliance. Use a
special scraper for the glass . Put
the scraper on the glass surface at
an acute angle and move the blade
on the surface .
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metal-
lic discolorations. Use a special
cleaning agent for glass ceramic or
stainless steel.
2.
Clean the appliance with a moist cloth
and some detergent.
3.
At the end rub the appliance dry
with a clean cloth.
7. TROUBLESHOOTING
Problem Possible cause and remedy
The appliance does not
operate.
• Examine the fuse in the electrical system of the
house in the fuse box. If the fuses blow time after
time, speak to an authorised electrician.
The cooking zone does
not heat up.
• Make sure that the appliance is plugged in and the
electrical supply is switched on.
• Make sure that you turn the correct control knob.
• Examine the fuse in the electrical system of the
house in the fuse box. If the fuses blow time after
time, speak to an authorised electrician.
Acoustic warning (double
acoustic signal) sounds.
• The pot is not suitable. Use suitable cookware.
• No cookware on the cooking zone. Place cook-
ware on the cooking zone.
• The diameter of the bottom of the cookware is too
small for the cooking zone Move onto a smaller
cooking zone. Use suitable cookware.
The effectiveness of the
hob is not satisfactory.
• Make sure that the hob is clean and dry.
• Make sure that the cookware is the correct size for
the cooking zone.
• Make sure that the cookware has a flat bottom.
• Make sure that the heat setting is correct for this
type of cooking.
If there is a fault, first try to find a solution
to the problem yourself. If you cannot find
a solution to the problem yourself, speak
your dealer or the local Service Force
Centre.
If you operated the appliance in-
correctly, or the installation was
not carried out by a registered en-
gineer, the visit from the customer
service technician or dealer may
not take place free of charge,
even during the warranty period.
22
www.electrolux.com
Comentários a estes Manuais