Electrolux EGU6647LOX Manual do Utilizador Página 1

EGU6647LOXEN Hob User Manual

3.5 Replacement of theconnection cableThe replacement of electriccable must be carried outexclusively by the serviceforce centre or by personnelwith s

5.6.BAA) supplied sealB) assembled bracket7.CAUTION!Install the appliance only ona worktop with flat surface.3.7 Possibilities for insertionThe panel

4. PRODUCT DESCRIPTION4.1 Cooking surface layout21341Rapid burner2Semi-rapid burner3Auxiliary burner4Control knobs4.2 Control knobSymbol Descriptionno

2. Keep the control knob pushed forequal or less than 10 seconds. Thislets the thermocouple warm up. Ifnot, the gas supply is interrupted.3. Adjust th

CAUTION!Make sure that the pots areplaced centrally on theburner in order to getmaximum stability and to getlower gas consumption.6.2 Diameters of coo

7.4 Cleaning the hob• Remove immediately: melted plastic,plastic foil, sugar and food with sugar.If not, the dirt can cause damage tothe hob. Take car

8.1 What to do if...Problem Possible cause RemedyThere is no spark whenyou try to activate thespark generator.The hob is not connectedto an electrical

8.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.

Electric sup‐ply:220-240 V ~ 50-60 Hz3 core flexible cable with non rewireableplug fitted with a 3 amp cartridge fuse Appliance cat‐egory:I2HGas conne

11. ENVIRONMENTAL CONCERNSRecycle materials with the symbol .Put the packaging in relevant containersto recycle it. Help protect theenvironment and h

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867321858-F-482018

instructions in a safe and accessible location for futurereference.1.1 Children and vulnerable people safety• This appliance can be used by children a

• CAUTION: The cooking process has to be supervised.A short term cooking process has to be supervisedcontinuously.• WARNING: Danger of fire: Do not st

2.1 InstallationWARNING!Only a qualified person mustinstall this appliance.Prior to installation, ensurethat the local distributionconditions (nature

• Use only correct isolation devices: lineprotecting cut-outs, fuses (screw typefuses removed from the holder), earthleakage trips and contactors.• Th

the room where the appliance isinstalled.• Prolonged intensive use of theappliance may call for additionalventilation, for example opening of awindow,

area of 50 cm² is required, while if thevolume exceeds 11 m³ no air vent isrequired.However, if the room has a door whichopens directly to the outside

Rigid connection:Carry out connection by using metal rigidpipes (copper with mechanical end).3.4 Electrical connection• Do not pull the mains cable to