Electrolux EBGL7SP Manual do Utilizador descarregar pdf (Página 11)

Oven function Application

Half Steam +

Heat

For dishes with a high moisture content and for

poaching fish, custard royale and terrines.

Full Steam For vegetables, fish, potatoes, rice, pasta or special

side-dishes.

6.3 Setting the oven function

1. Activate the appliance with .

The display shows the set temperature,

the symbol and the number of the oven

function.

2. Touch or to set an oven

function.

3. Touch or the appliance starts

automatically after five seconds.

If you activate the appliance

and do not set an oven

function or programme, the

appliance deactivates

automatically after 20

seconds.

6.4 Changing the temperature

Touch or to change the

temperature in steps of 5 °C.

When the appliance is at the set

temperature, an acoustic signal sounds

three times and the Heat up indicator

goes out.

6.5 Checking the temperature

You can see the temperature in the

appliance when the function or

programme operates.

1. Touch .

The Temperature / Time display shows the

temperature in the appliance.

2. Touch to go back to the set

temperature or the display shows it

automatically after five seconds.

6.6 Fast heat up function

The Fast heat up function is not available

with every oven function. An acoustic

signal sounds if the Fast heat up function

is not available for the set function if Faulty

tone is activated in the "Settings menu".

The Fast heat up function decreases the

heat up time.

To activate the Fast heat up function

touch and hold for more than three

seconds.

If you activate the Fast heat up function,

the bars on the display flash one by

one and

comes on to show that the

function operates.

6.7 Steam cooking

The water drawer cover is in the control

panel.

WARNING!

Do not put water directly into

the steam generator!

Use only water as the liquid.

Do not use filtered

(demineralised) or distilled

water.

1. Press the cover of the water drawer to

open it.

2. Fill the water drawer with 700 ml of

water.

The water supply is sufficient for

approximately 50 minutes.

3. Push the water drawer to its initial

position.

4. Activate the appliance.

5. Set the steam function (refer to the

"Oven functions" table) and the

temperature.

6. If necessary, touch

to set the

DURATION or END function

(refer to "Setting the END" or "Setting

the DURATION").

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentários a estes Manuais

Sem comentários