Electrolux GK58IPLCN Manual do Utilizador descarregar pdf (Página 14)

an acute angle and move the blade on

the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and non-abrasive

detergent. After cleaning, wipe the hob

dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a moist cloth.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op-

erate the hob.

The fuse is blown. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse is blown

again and again, contact a

qualified electrician.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor field.

STOP+GO function oper-

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva-

ted.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

Residual heat indicator

does not come on.

The zone is not hot be-

cause it operated only for a

short time.

If the zone operated suffi-

ciently long to be hot,

speak to an Authorised

Service Centre.

Automatic Heat Up function

does not operate.

The zone is hot. Let the zone become suffi-

ciently cool.

The highest heat setting is

set.

The highest heat setting has

the same power as the

function.

The heat setting changes

between two levels.

Power management func-

tion operates.

Refer to "Daily use" chapter.

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentários a estes Manuais

Sem comentários