Electrolux ENN28600 Manual do Utilizador

user manualFridge-FreezerENN28600

Problem Possible cause Solution Plug is not connected to themains socket properlyConnect the mains plug properly Power does not reach the appli-ance

The appliance must be earthed. The powersupply cable plug is provided with a contactfor this purpose. If the domestic power sup-ply socket is not eart

min.200 cm2min.200 cm2Installing the applianceCaution! Make sure that the mainscable can move freely.Do these steps.1. Install the appliance in the ni

5. Remove the correct part from the hingecover (E). Make sure to remove the partDX, in the case of right hinge, SX in op-posite case.6. Attach the cov

ca. 50 mmca. 50 mm21 mm90° 90° 21 mm10. Push the part Hc on the part Ha.HaHc11. Open the appliance door and the kitchenfurniture door at a

HbHdDo a final check to make sure that:• All screws are tightened.• The magnetic sealing strip is attachedtightly to the cabinet.Environmental concern

212717101-00-22022010www.electrolux.com

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comContentsSafety information 2Control panel 4First use 4Daily use

Warning! Any electrical component(power cord, plug, compressor) must bereplaced by a certified service agent orqualified service personnel.1. Power co

Environment ProtectionThis appliance does not contain gasseswhich could damage the ozone layer, ineither its refrigerant circuit or insulationmaterial

Daily useFreezing fresh foodThe freezer compartment is suitable forfreezing fresh food and storing frozen anddeep-frozen food for a long time.To freez

Helpful hints and tipsHints for energy saving• Do not open the door frequently or leave itopen longer than absolutely necessary.• If the ambient tempe

• water ices, if consumed immediately afterremoval from the freezer compartment,can possibly cause the skin to be freezeburnt;• it is advisable to sho

Defrosting of the freezerThe freezer compartment of this model, onthe other hand, is a "no frost" type. Thismeans that there is no buildup o

Problem Possible cause Solution Products placed in can preventwater from flowing into the col-lectorReplace the products so that theycan not touch th