Electrolux E30DF74EPS Especificações descarregar pdf (Página 28)

[] Electrolux [ ic o N

1-'II / :1_ 1 Ui_ ,B1 i_l _.1 i[, [=i [,] ile[,] itVL_i_-1[,] i

3-1 Move the range out from the wail, if necessary.

3-2 If the range is connected to a natural gas supply

line, close the gas supply valve.

3-3 Disconnect the range power connector from the

electrical outlet.

3-4 Remove the grates from the cooktop.

3-5 Remove all of the burner caps and burner rings

from top of the burner heads.

Burner Cap

Burner

Burner Head-

Fiqure 3-1 Grate, Burner Cap and Burner Rinq Removal

4-1 Locate and remove the regulator access panel

on the back of the range.

4-2 Locate the regulator and remove the regulator

cap. Make sure that the regulator spring remains

in place.

4-3 Remove the spool from the cap and insert the

opposite side. The large end of the spool must

insert into the regulator first for LPG operation.

4-4 Replace the cap. The access panel will be re-

installed later.

Regulator Spring

Spool: Direction

for LPG XXX

Regulat°r Cap X4@ _'X

Spool: Direction

for natural gas

Fiqure 4-1

Access panel for

E36DF76EPS &

E48DF76EPS

Access panel for-_D

E30DF74EPS

Requlator Conversion

..... -j

°- .... °

Back of range

Page 4

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Sem comentários

Electrolux E30DF74EPS Especificações Página 28