Electrolux EYL10516WM Manual do Utilizador

EYL85016WMEYL95016WMEYL10516WMWATER HEATER USER MANUAL

10 www.electrolux.com Isolating stop valveMains water supplyShower unitBath spillover levelHose retainerMinimum 25mm between showerhead and sp

11ENGLISH5. INSTALLATION5.1 Select the location and hang up the showerWhile planning your shower installation, make sure you allow sufcient clearance

12 www.electrolux.com 5. INSTALLATIONBottom left inlet entryTop left inlet entryRear left inlet entryTop right inlet entryLeft inlet entryScre

13ENGLISHConnect the mains water supply to the water inlet by using a 15MM pusht (not supplied). DO NOT use excessive force when making the connectio

5. INSTALLATIONThis Electrolux shower heater has 2 wiringterminals and 2 earthing terminals shownas Fig. 6. You can choose the properterminals when co

5. INSTALLATIONFig. 8Turn the heating power knob to the COLD “ ” position.3.Turn the temperature control knob fully clockwise to the Minimum Wate

Sliding rail (without a hold)Fig 11Sliding rail bottom (with a hold)To install the assembly of the sliding rail.4.a.Assemble the sliding seat into the

5. INSTALLATIONc.Assemble the soap tay on the soap tray holder.d.Place the sliding rail between the holders and x the sliding rail by xing the lower

6. OPERATION INSTRUCTIONTemperature controlerThe temperature knob adjusts water temperature by increase/decrease the water ow:- Clockwise rotate, dec

6. When a smooth flow of water is obtained, rotate the temperature control from MINIMUM to MAXIMUM several times to release any trapped air within the

2 www.electrolux.comWE’RE THINKING OF YOUThank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of prof

Spray + MassageMassageSetting Water ow DescriptionSetting Water ow DescriptionSpraySettingBroader, suitable for large area shower.Widest, suitable f

7. MAINTENANCEIt is recommended that the lter is periodically cleaned, in order to maintain the performance of the shower.Before removing the filter,

8. HELPFUL HINTS AND TIPSTP – Temperature ProtectionAbnormal safety cut-outDuring normal operation if the temperature exceeds the showering safety lim

9. TROUBLESHOOTINGProblem/Symptom Cause Action/CureShower fail to operable, no water ow out.Interrupted power supply.Unit malfunction.Blown fuse or c

9. TROUBLESHOOTINGProblem/Symptom Cause Action/CureShower varies from normal temperature to cold during use.Water pressure has dropped below minimum r

5519W17170-000-001www.electrolux.com/shop

3ENGLISHCUSTOMER CARE AND SERVICEWe recommend the use of original spare parts. When contacting Electrolux Customer Service, ensure that you have the f

Before the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible if an incorrect installa

The appliance must be earthed.Do not install the appliance in locations where freezing can occur.The means for disconnection must be incorporated in t

Remove all the packaging.Do not install or use a damaged appliance.All products manufactured and supplied by Electrolux are safe provided they are ins

Do not change the specication of this appliance.Do not operate the shower unit if the showerhead or spray hose has been damaged or is blocked.2.3 Dis

8 www.electrolux.com 3. Electrical RequirementsMains electrical supplyShower unit30mA RCD for ampage of MCB/Fuse see circuit protection table

9ENGLISH3. Electrical RequirementsThe current rating will be reduced if the cabling is bunched with others, surrounded by thermal loft or wall insulat